If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
1x Temperature controller ITC-308
1x English Manual
Pre-wired controller ITC-308 is served as the successor to the STC-1000. If you don’t want to build your own STC-1000, the Inkbird ITC-308 is the solution!
Setup is easy, straightforward and quick.
The cord on the remote temperature sensor is a bit over 6 feet long.
Accurate displays, thermostatic function and temperature calibration.
It’s an all in one, simple solution providing control of cooling and heating.